European Type Turnbuckle with Eye and Eye

Stainless Steel European Type Turnbuckle with Eye and Eye

The European Type Turnbuckle with Eye and Eye is an open-body rigging component designed for straight-line tensioning. Unlike the hook-end style, the eye-to-eye configuration features closed circular loops on both ends. This enclosed design ensures the connected cables or shackles cannot slip out, offering higher safety and slightly higher load thresholds for static, permanent installations.

Body Type: Open-frame configuration allowing easy inspection of thread engagement.

Threading Mechanism: Left-hand threads on one end, right-hand threads on the other. 

Rotating the center body pulls both eyes inward to tighten the line.

Sizing Convention: Standardized by metric thread sizes, usually ranging from M5 to M30+.

Common Uses

These turnbuckles are popular for:

Securing boat rigging and sailing equipment

Tensioning fence wires and cables

Supporting outdoor shade structures

Adjusting guy-wires for antennas and towers

Creating tensioned cable railings

Securing tarps and awnings   

Don’t forget that wire ropes should never be knotted or twisted or they can be dangerously weakened. 

Stainless Steel European Type Turnbuckle with Eye and Eye

Let us know which turnbuckle you need.

Haifan Rigging supply a range of rigging screws and turnbuckles.They come with a variety of fittings for each end to suit your particular application,such as eye and eye, eye and hook,hook and hook, jaw and jaw, hook and jaw,etc.Some rigging screws are fitted with locking nuts/barrel strainers to ensure that there is no unwanted loosening of the rope.

To put in your order, just fill out our short Inquiry form here, but please do ask us if you need anything custom-made.

If you wish to ask a question or need further advice, you are welcome to contact us. We’ll be happy to help.

We are always available for clarification and for order.

We look forward to hearing from you!