Swage Threaded Stainless Cable Tensioner – Used on 3/16″ Cable
This is our swage threaded stainless cable tensioner which is designed for 3/16” inch cable,it is different from the 1/8'' in size,it all depends on what you are going for.If you want a cable rail that all but disappears on you 1/8” is a great option.3/16” just gives you a little more luxurious look,a litter more commercial grade.It just depends on the look you’re going for.We want you to see the size difference there to help you in your decision making.
So again,the same features apply with 3/16” fittings.We’ve added the ring to help you know how far the cable goes in so you know where to swage it,as well a guide for cutting the cable.So when you hold this up against the side of the post,you’re able to tension the cable,pull it as tight as you can and know right where you should cut the cable.
Just like with the 1/8” fittings,to help aid you in cutting these and making it as easy as possible to get the acorn nut back on.If you spin on a second nut, you’re able to use that as a guide and cut it,once you’ve waited a week and gone out and re-tension all the fittings to make sure there isn’t any slack that’s accumulated over the week as the system has settled.Go ahead and retention that the second time and then feed on the second nut,cut off the excess thread and when you back this nut off,you’ll see that it will rethread the shaft for you.Making it much easier to install your acorn nut.
What is included:1 x swage threaded stainless cable tensioner with washer, hex nut and acorn/cap nut.All fasteners are stainless steel (Hand crimping tool NOT included).
Stainless Steel Extra Long Threaded Terminal for 3/16″ Cable Extra Long Threaded Terminals provide tensioning for your cables and is typically used for longer runs where more tensioning ability is required.These Terminals have 7-5/8″ of take-up and are the most traditional way of installing a cable railing and are paired with a second Terminal, a Deck Toggle or a Stemball Swage.They can be used in any type of end post: wood posts, aluminum or steel and are good for indoor or outdoor applications. The Terminals are T316 “marine grade” stainless steel and include a Stainless Hex Nut. The Terminal hand-crimps onto the ends of your cable runs using a Hand Crimper Tool.
Come and order your Swage Threaded Stainless Cable Tensioner – Used on 3/16″ Cable
Haifan Rigging supply a range of cable railing accessories.They come with a variety of fittings for each end to suit your particular application.
To put in your order,just fill out our short inquiry form here,but please do ask us if you need anything custom-made.
If you wish to ask a question or need further advice,you are welcome to contact us.we'll be happy to help.
We are always available for clarification and for order.
We look forward to hearing from you!
